Scotch-Weld 7100050479 Adhesive, 1 gal Container Pail Container, Clear, 8 to 24 hr at 72 deg F Curing

Scotch-Weld, 7100050479, Adhesive, Pail Container, 1 gal Container, Acrylic Base, Composition: Synthetic Rubber Oligomers, Polyfunctional Aziridine, Amine Borane Complex, Amorphous Silica, 10 min Work Life, 1 hr Functional Cure, 8 to 24 hr at 72 deg F Curing, Clear, 40 deg F, 10:1 Mixing Ratio, For Use On: Plastic, Metal, Glass, Ceramic, Wood and Hardboard

3M Scotch-Weld structural plastic adhesive DP8010 blue is a 2-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene and thermoplastic elastomers (TPEs) without special surface preparation. When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt etc. 3M Scotch-Weld structural plastic adhesive DP8010 blue also bonds metals, ceramics and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing. Our 3M Scotch-Weld acrylic adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 min work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8 to 24 hr (at 72 deg F /22 deg C). Acrylic adhesives are 2-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.