3M 7100007793 Fast Tack Water Based Adhesive, 1 gal Container Can Container, Purple, 300 deg F

3M, 7100007793, Adhesive, Water Based, Series: Fast Tack, Can Container, 1 gal Container, 1 gal Net Weight, 450/720/1800 sq-ft/gal Coverage, 1 min Drying, 1 to 10 min Setting, 10 min Curing, Purple, 300 deg F, 1 Specific Gravity, Flammability: 0/Non-Flammable, Adheres to: Fabric, Felt, Cork and Fibrous Glass, Fiberglass Insulation, Fiberglass Reinforced Plastic, Latex, Urethane, High Pressure Laminate, Metal, Paper and Cardboard, Plastic Polyolefin and Thermoplastic Elastomer, Polyolefin Foam, Polystyrene Foam, Vinyl Plasticized, Wood and Hardboard

3M Fast Tack water based adhesive 1000NF is a unique, water based adhesive specially designed to deliver an effective combination of fast, heat resistant bonding, repositionability, and high ultimate strength. Our adhesive is non-flammable, polychloroprene free, and has zero VOCs (per EPA test method 24). 3M Fast Tack water based adhesive 1000NF bonds quickly while achieving handling strength in approximately one min or less. Along with its fast action, the potential for 1-surface application also increases productivity while using less product. By formulating an adhesive that is 48% solids, 3M Fast Tack water based adhesive 1000NF provides up to three times more coverage than solvent based adhesives. It adheres to many types of flexible foam, latex foams, fabric, polyester fiberfill, canvas, wood, plywood, particleboard, and many plastic and metal surfaces. It is certified to GREENGUARD® product emission standard for children and schools for low emitting interior building materials. Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until youve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.