Scotch 7000028865 Double Sided Transfer Tape, 36 yd L x 1/2 in W, 5 mil THK, 5 mil 300 Acrylic Adhesive, Clear

Scotch, 7000028865, Transfer Tape, Double Sided, 36 yd Length, 1/2 in Width, 5 mil Thickness, Densified Kraft Paper Liner, Clear, 5 mil 300 Acrylic Adhesive, 180 deg F Maximum Operating, -40 deg F Minimum Operating

Scotch ATG adhesive transfer tape 969 features very high initial adhesion and good shear holding power for bonding most plastics and glossy coated materials. Reverse wound on 1 in Dia core for use in Scotch ATG Applicators. Scotch ATG adhesive transfer tape 969 bonds a wide variety of materials including plastics, glass, paints and materials with glossy surfaces. Very high initial adhesion creates an immediate, permanent bond that provides good solvent and UV resistance. The adhesive can stick to difficult, varied and textured surfaces, including areas with high humidity and exposed to sunlight. Our Scotch ATG adhesive transfer tape 969 features 3M™ adhesive 300, which affords high initial adhesion and bonds well to a variety of substrates including metals and many coated papers, fabrics and foams as well as high surface energy (HSE) and low surface energy (LSE) plastics. This acrylic adhesive 300 has been tested to ASTM procedures for peel adhesion, temperature and humidity as well as resistance to UV, fuels, acids and detergents. Scotch ATG system has proven to be the go to adhesive solution since the early 1970s. For light and heavy industrial applications, the Scotch ATG adhesive applicators are convenient, reliable, versatile tools capable of attaching a wide range of materials. With no cure time, the adhesive instantly bonds long, large and small surfaces. As a portable, handheld solution, it can apply tape to any shape or form, even from an uncomfortable position, while allowing your free hand to hold the part. Scotch ATG 700 provides convenient, fast, 1-hand application. With Scotch ATG applicators, a touch of the finger triggers a quick, controlled application of Scotch ATG transfer tape at the same time as the liner rewinds into the applicator. There is no mess and no cleanup. 3M™ advanced acrylic adhesive bonds on contact and is formulated with a choice of properties including high temperature resistance, acid free, general purpose and high initial adhesion. The ATG system is a cost effective and more productive replacement to many double sided tapes, tape applicators, as well as adhesive dots, staples and liquid adhesives. This applicator allows the ATG liner to rewind into the applicator as the adhesive is applied for hassle free operation that eliminates messes and cleanup.