M.A. Ford

Sort By

M.A. Ford 13231500A TuffCut End Mill Chipbreaker, 8 mm Dia Cutter, (4) Flutes, 8 mm Dia Shank, 83 mm OAL, ALtimaM.A. Ford$103.33

M.A. Ford 13237500AW TuffCut End Mill Chipbreaker, 3/8 in Dia Cutter, (4) Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, ALtimaM.A. Ford$140.02

M.A. Ford 12275000A Roughing/Finishing End Mill, 3/4 in Dia Cutter, (4) Flutes, 3/4 in Dia Shank, 5-1/4 in OAL, ALtimaM.A. Ford$510.31

M.A. Ford 12278740A Roughing/Finishing End Mill, 20 mm Dia Cutter, (4) Flutes, 20 mm Dia Shank, 133 mm OAL, ALtimaM.A. Ford$596.70

M.A. Ford 13210000B TuffCut End Mill Chipbreaker, 1 in Dia Cutter, (4) Flutes, 1 in Dia Shank, 6 in OAL, ALtima BlazeM.A. Ford$920.81

M.A. Ford 13225000W TuffCut End Mill Chipbreaker, 1/4 in Dia Cutter, (4) Flutes, 1/4 in Dia Shank, 3 in OAL, UncoatedM.A. Ford$76.25

M.A. Ford 1400312N28GX Center Cutting Ball End Mill, 1/32 in Dia Cutter, (4) Flutes, 1/8 in Dia Shank, 3 in OAL, GemXM.A. Ford$163.54

M.A. Ford 13243750W TuffCut End Mill Chipbreaker, 7/16 in Dia Cutter, (4) Flutes, 7/16 in Dia Shank, 4 in OAL, UncoatedM.A. Ford$163.22

M.A. Ford 13247240A TuffCut End Mill Chipbreaker, 12 mm Dia Cutter, (4) Flutes, 12 mm Dia Shank, 102 mm OAL, ALtimaM.A. Ford$202.47

M.A. Ford 13250000GP TuffCut End Mill Chipbreaker, 1/2 in Dia Cutter, (4) Flutes, 1/2 in Dia Shank, 4 in OAL, Gem PlusM.A. Ford$252.70

M.A. Ford 11105510A Roughing/Finishing End Mill, 1.4 mm Dia Cutter, (4) Flutes, 3 mm Dia Shank, 38 mm OAL, ALtimaM.A. Ford$36.08

M.A. Ford 13237500B TuffCut End Mill Chipbreaker, 3/8 in Dia Cutter, (4) Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, ALtima BlazeM.A. Ford$143.68

M.A. Ford 11105500T Roughing/Finishing End Mill, 0.0550 in Dia Cutter, (4) Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, TiNM.A. Ford$36.48

M.A. Ford 13275000C TuffCut End Mill Chipbreaker, 3/4 in Dia Cutter, (4) Flutes, 3/4 in Dia Shank, 5-1/4 in OAL, TiCNM.A. Ford$607.08

M.A. Ford 13237500GP TuffCut Roughing/Finishing End Mill Chipbreaker, 3/8 in Dia Cutter, (4) Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Gem PlusM.A. Ford$165.56

M.A. Ford 13239370A TuffCut End Mill Chipbreaker, 10 mm Dia Cutter, (4) Flutes, 10 mm Dia Shank, 89 mm OAL, ALtimaM.A. Ford$163.91

M.A. Ford 13237500T TuffCut End Mill Chipbreaker, 3/8 in Dia Cutter, (4) Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, TiNM.A. Ford$141.25

M.A. Ford 13250000TW TuffCut End Mill Chipbreaker, 1/2 in Dia Cutter, (4) Flutes, 1/2 in Dia Shank, 4 in OAL, TiNM.A. Ford$135.25

M.A. Ford 13275000A TuffCut End Mill Chipbreaker, 3/4 in Dia Cutter, (4) Flutes, 3/4 in Dia Shank, 5-1/4 in OAL, ALtimaM.A. Ford$607.08

M.A. Ford 13275000GP TuffCut Roughing/Finishing End Mill Chipbreaker, 3/4 in Dia Cutter, (4) Flutes, 3/4 in Dia Shank, 5-1/4 in OAL, Gem PlusM.A. Ford$645.67

M.A. Ford 13237500W TuffCut End Mill Chipbreaker, 3/8 in Dia Cutter, (4) Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, UncoatedM.A. Ford$128.47

M.A. Ford 13262500T TuffCut End Mill Chipbreaker, 5/8 in Dia Cutter, (4) Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiNM.A. Ford$410.77

M.A. Ford TuffCut GP 16515620GX Ball Nose Center Cutting General Purpose Roughing and Finishing End Mill, 5/32 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, GemX CoatedM.A. Ford$210.97

M.A. Ford TuffCut GP 165S2500GX Ball Nose Center Cutting General Purpose Roughing and Finishing End Mill, 1/4 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, GemX CoatedM.A. Ford$274.22

M.A. Ford TuffCut GP 16906250R.010 Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, UncoatedM.A. Ford$55.11

M.A. Ford TuffCut GP 16518750GX Ball Nose Center Cutting General Purpose Roughing and Finishing End Mill, 3/16 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, GemX CoatedM.A. Ford$199.09

M.A. Ford TuffCut GP 16906250C Center Cutting General Purpose Single End Square End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, TiCN CoatedM.A. Ford$27.45

M.A. Ford TuffCut GP 16906250R.005F Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Fordlube CoatedM.A. Ford$66.64

M.A. Ford TuffCut GP 16906250R.005A Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, ALtima CoatedM.A. Ford$66.64

M.A. Ford TuffCut GP 16906250R.010F Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Fordlube CoatedM.A. Ford$66.64

M.A. Ford TuffCut GP 16906250R.015 Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, UncoatedM.A. Ford$55.11

M.A. Ford TuffCut GP 16906250R.005 Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, UncoatedM.A. Ford$55.11

M.A. Ford TuffCut GP 16906250R.010A Center Cutting Corner Radius General Purpose Single End Roughing and Finishing End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, ALtima CoatedM.A. Ford$66.64

M.A. Ford TuffCut DM 15715621A Non-Center Cutting Square End End Mill, 5/32 in Dia Cutter, 15/32 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 3 in OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15715622A Non-Center Cutting Square End End Mill, 5/32 in Dia Cutter, 15/32 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 3 in OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15715751A Non-Center Cutting Square End End Mill, 4 mm Dia Cutter, 12 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 76 mm OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford 41250027EM 41ESB Metric Carbide Burr, Flat End, Cylindrical Head, 6 mm Dia Head, 16 mm L of Cut, 50 mm OAL, Double CutM.A. Ford$25.15

M.A. Ford TuffCut DM 15723623A Non-Center Cutting Square End End Mill, 6 mm Dia Cutter, 15 mm Length of Cut, 6 Flutes, 6 mm Dia Shank, 90 mm OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15731502A Non-Center Cutting Square End End Mill, 8 mm Dia Cutter, 20 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 100 mm OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731503A Non-Center Cutting Square End End Mill, 8 mm Dia Cutter, 20 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 100 mm OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731505A Non-Center Cutting Square End End Mill, 8 mm Dia Cutter, 20 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 100 mm OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731253A Non-Center Cutting Square End End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 6 Flutes, 5/16 in Dia Shank, 4 in OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731252A Non-Center Cutting Square End End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 6 Flutes, 5/16 in Dia Shank, 4 in OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731251A Non-Center Cutting Square End End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 6 Flutes, 5/16 in Dia Shank, 4 in OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15725004A Non-Center Cutting Square End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 3-1/2 in OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15725003A Non-Center Cutting Square End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 3-1/2 in OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15718752A Non-Center Cutting Square End End Mill, 3/16 in Dia Cutter, 9/16 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 3 in OAL, ALtima 52 CoatedM.A. Ford$130.06

M.A. Ford TuffCut DM 15731254A Non-Center Cutting Square End End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 6 Flutes, 5/16 in Dia Shank, 4 in OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15731504A Non-Center Cutting Square End End Mill, 8 mm Dia Cutter, 20 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 100 mm OAL, ALtima 52 CoatedM.A. Ford$163.10

M.A. Ford TuffCut DM 15725002A Non-Center Cutting Square End End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 3-1/2 in OAL, ALtima 52 CoatedM.A. Ford$130.06